Specifications

clear dhcp pool netbios-node-type
13-28 Configuring DHCP Server
clear dhcp pool netbios-node-type
UsethiscommandtoremovetheNetBIOSnodetypefromtheaddresspoolbeingconfigured.
Syntax
clear dhcp pool poolname netbios-node-type
Parameters
Defaults
None.
Mode
Switchcommand,read‐write.
Example
ThisexampleremovestheNetBIOSnodetypefromtheaddresspool“auto1.”
C3(rw)->clear dhcp pool auto1 netbios-node-type
set dhcp pool option
UsethiscommandtoconfigureDHCPoptions,describedinRFC2 132.
Syntax
set dhcp pool poolname option code {ascii string | hex string-list | ip address-
list}
Parameters
Defaults
None.
Mode
Switchcommand,read‐write.
poolname Specifiesthenameoftheaddresspool.Poolnamesmaybeupto31
charactersinlength.
poolname Specifiesthenameoftheaddresspool.Poolnamesmaybeupto31
charactersinlength.
code SpecifiestheDHCPoptioncode,asdefinedinRFC2132.Valuecanrange
from1to254.
asciistring SpecifythedatainASCIIformat.AnASCIIcharacterstringcontaininga
spacemustbe
enclosedinquotations.
hexstring‐list SpecifythedatainHEXformat.Upto8HEXstringscanbeentered.
ipaddress‐list SpecifythedatainIPaddressformat.Upto8IPaddressescanbeentered.