Specifications

clear dhcp pool host
SecureStack C3 Configuration Guide 13-17
C3(rw)->set dhcp pool manual1 hardware-address 0001.f401.2710
C3(rw)->set dhcp pool manual1 host 15.12.1.99 255.255.248.0
clear dhcp pool host
UsethiscommandtoremovethehostIPaddressfromamanualbindingaddresspool.
Syntax
clear dhcp pool poolname host
Parameters
Defaults
None.
Mode
Switchcommand,read‐write.
Example
ThisexampledeletesthehostIPaddressfromtheaddresspoolnamed“manual1.”
C3(rw)->clear dhcp pool manual1 host
set dhcp pool client-identifier
UsethiscommandtoconfiguretheclientidentifieroftheDHCPclientandcreateanaddresspool
formanualbinding.Youcanuseeitherthiscommandorthesetdhcppoolhardware‐address
commandtocreateamanualbindingpool,butusingbothisnotrecommended.
Syntax
set dhcp pool poolname client-identifier id
Parameters
Defaults
None.
Mode
Switchcommand,read‐write.
poolname Specifiesthenameoftheaddresspool.Poolnamesmaybeupto31
charactersinlength.
poolname Specifiesthenameoftheaddresspool.Poolnamesmaybeupto31
charactersinlength.
id Specifiestheuniqueclientidentifierforthisclient.Thevaluemustbe
enteredinxx:xx:xx:xx:xx:xxformat.