Specifications

Using the Command Line Interface
SecureStack C3 Configuration Guide 1-9
Writeaccesswillbeabletomodifyallmodifiableparametersinsetandshowcommands,aswell
asviewRead‐Onlycommands.AdministratorsorSuperUserswillbeallowedallRead‐Writeand
Read‐Onlyprivileges,andwillbeabletomodifylocaluseraccounts.TheSecureStackC3switch
indicateswhich
modeauserisloggedinasbydisplayingoneofthefollow ingprompts:
•Admin:C3(su)‐>
•Read‐Write:C3(rw)‐>
•Read‐Only:C3(ro)‐>
Performing Keyword Lookups
Enteringaspaceandaquestionmark(?)afterakeywordwilldisplayallcommandsbeginning
withthekeyword.Figure 1‐3showshowtoperformakeywordlookupfortheshowsnmp
command.Inthiscase,fouradditionalkeywordsareusedbytheshowsnmpcommand.Entering
aspaceand
aquestionmark(?)afteranyoftheseparameters(suchasshowsnmpcommunity)
willdisplayadditionalparametersnestedwithinthesyntax.
Figure 1-3 Performing a Keyword Lookup
Enteringaquestionmark(?)withoutaspaceafterapartialkeywordwilldisplayalistof
commandsthatbeginwiththepartialkeyword.Figure 1‐4shows
howtousethisfunctionforall
commandsbeginningwithco:
Figure 1-4 Performing a Partial Keyword Lookup
Displaying Scrolling Screens
IftheCLIscreenlengthhasbeensetusingthesetlengthcommandasdescribedonpage3‐25,CLI
outputrequiringmorethanonescreenwilldisplay--More-- toindicatecontinuingscreens.To
displayadditionalscreenoutput:
•PressanykeyotherthanENTERtoadvancetheoutputonescreenat
atime.
•PressENTERtoadvancetheoutputonelineatatime.
TheexampleinFigure 1‐5showshowtheshowmaccommandindicatesthatoutputcontinueson
morethanonescreen.
C3(su)->show snmp ?
community SNMP v1/v2c community name configuration.
notify SNMP notify configuration
targetaddr SNMP target address configuration
targetparams SNMP target parameters configuration
C3(rw)->co?
configure copy
C3(su)->co
Note: At the end of the lookup display, the system will repeat the command you entered without the
?.