Specifications

Event Group Commands
SecureStack C3 Configuration Guide 12-15
Event Group Commands
Purpose
TodisplayandclearRMONevents,andtoconfigureRMONeventproperties.
Commands
show rmon event
UsethiscommandtodisplayRMONevententryproperties.
Syntax
show rmon event [index]
Parameters
Defaults
Ifindexisnotspecified,informationabou tallRMONentrieswillbedisplayed.
Mode
Switchcommand,read‐only.
Example
ThisexampleshowshowtodisplayRMONevententry3:
C3(rw)->show rmon event 3
Index 3
----------------
Owner = Manager
Status = valid
Description = STP Topology change
Type = log-and-trap
Community = public
Last Time Sent = 0 days 0 hours 0 minutes 37 seconds
Table 12‐4providesanexplanationofthecommandoutput.
For information about... Refer to page...
show rmon event 12-15
set rmon event properties 12-16
set rmon event status 12-17
clear rmon event 12-18
index (Optional)DisplaysRMONpropertiesandlogentriesforaspecificentry
indexID.