Specifications

Configuring Node Aliases
11-34 Logging and Network Management
Configuring Node Aliases
Purpose
Toreview,disable,andre‐enablenode(port)aliasfunctionality,which determineswhatnetwork
protocolsarerunningononeormoreports.
Commands
show nodealias config
Usethiscommandtodisplaynodealiasconfigurationsettingsononeormoreports.
Syntax
show nodealias config [port-string]
Parameters
Defaults
Ifport‐stringisnotspecified,nodealiasconfigurationswillbedisplayedforallports.
Mode
Switchcommand,read‐only.
Example
Thisexampleshowshowtodisplaynodealiasconfigurationsettingsforportsfe.2.1through9:
C3(rw)->show nodealias config fe.2.1-9
Port Number Max Entries Used Entries Status
----------- ----------- ------------ ------
fe.2.1 16 0 Enable
fe.2.2 47 0 Enable
fe.2.3 47 2 Enable
fe.2.4 47 0 Enable
fe.2.5 47 0 Enable
fe.2.6 47 2 Enable
fe.2.7 47 0 Enable
fe.2.8 47 0 Enable
fe.2.9 4000 1 Enable
Table 11‐7providesanexplanationofthecommandoutput.
For information about... Refer to page...
show nodealias config 11-34
set nodealias 11-35
clear nodealias config 11-36
port‐string (Optional)Displaysnodealiasconfigurationsettingsforspecificport(s).