Specifications

set sntp poll-timeout
SecureStack C3 Configuration Guide 11-33
set sntp poll-timeout
Usethiscommandtosetthepolltimeout(inseconds)foraresponsetoaunicastSNTPrequest.
set sntp poll-timeout timeout
Parameters
Defaults
None.
Mode
Switchcommand,read‐write.
Example
ThisexampleshowshowtosettheSNTPpolltimeoutto10seconds:
C3(su)->set sntp poll-timeout 10
clear sntp poll-timeout
UsethiscommandtocleartheSNTPpolltimeout.
clear sntp poll-timeout
Parameters
None.
Defaults
None.
Mode
Switchcommand,read‐write.
Example
ThisexampleshowshowtocleartheSNTPpolltimeout:
C3(su)->clear sntp poll-timeout
timeout Specifiesthepolltimeoutinseconds.Validvaluesare1to30.