Specifications

Configuring Simple Network Time Protocol (SNTP)
SecureStack C3 Configuration Guide 11-27
Configuring Simple Network Time Protocol (SNTP)
Purpose
ToconfiguretheSimpleNetworkTimeProtocol(SNTP),whichsynchronizesdeviceclocksina
network.
Commands
show sntp
UsethiscommandtodisplaySNTPclientsettings.
Syntax
show sntp
Parameters
None.
Defaults
None.
Mode
Switchcommand,read‐only.
Example
ThisexampleshowshowtodisplaySNTPclientsettings:
C3(su)->show sntp
SNTP Version: 3
Current Time: TUE SEP 09 16:13:33 2003
For information about... Refer to page...
show sntp 11-27
set sntp client 11-29
clear sntp client 11-29
set sntp server 11-30
clear sntp server 11-30
set sntp poll-interval 11-31
clear sntp poll-interval 11-31
set sntp poll-retry 11-32
clear sntp poll-retry 11-32
set sntp poll-timeout 11-33
clear sntp poll-timeout 11-33