Specifications

Monitoring Network Events and Status
11-12 Logging and Network Management
Monitoring Network Events and Status
Purpose
Todisplayswitcheventsandcommandhistory,tosetthesizeofthehistorybuffer,andtodisplay
anddisconnectcurrentusersessions.
Commands
Commandstomonitorswitchnetworkeventsandstatusarelistedbelow.
history
Usethiscommandtodisplaythecontentsofthecommandhistorybuffer.Thecommandhistory
bufferincludesallthe switchcommandsentereduptoamaximumof100,asspecifiedintheset
historycommand(“sethistory”onpage 11‐13).
Syntax
history
Parameters
None.
Defaults
None.
Mode
Switchcommand,read‐only.
Example
Thisexampleshowshowtodisplaythecontentsofthecommandhistorybuffer.Itshowsthereare
fivecommandsinthebuffer:
C3(su)->history
1 hist
2 show gvrp
3 show vlan
4 show igmp
5 show ip address
For information about... Refer to page...
history 11-12
show history 11-13
set history 11-13
ping 11-14
show users 11-15
disconnect 11-15