Specifications

clear logging application
SecureStack C3 Configuration Guide 11-9
Mode
Switchcommand,read‐write.
Example
ThisexampleshowshowtosettheseveritylevelforSNMPto4sothaterrorconditionswillbe
loggedforthatapplication.
C3(rw)->set logging application SNMP level 4
clear logging application
Usethiscommandtoresettheloggingseveritylevelforoneorallapplicationstothedefaultvalue
of6(notificationsofsignificantconditions).
Syntax
clear logging application {mnemonic | all}
Parameters
Defaults
None.
Mode
Switchcommand,read‐write.
Example
Thisexampleshowshowtoresettheloggi ngseveritylevelto6forSNMP.
C3(rw)->clear logging application SNMP
show logging local
Usethiscommandtodisplaythestateofmessageloggingtotheconsoleandapersistentfile.
Syntax
show logging local
Parameters
None.
Defaults
None.
mnemonic Resetstheseveritylevelforaspecificapplicationto6.Validmnemonic
valuesandtheircorrespondingapplicationsare listedinTable 11‐3on
page 11‐8.
all Resetstheseveritylevelforallapplicationsto6.