Specifications

show logging application
SecureStack C3 Configuration Guide 11-7
show logging application
UsethiscommandtodisplaytheseveritylevelofSyslogmessagesforoneorallapplications
configuredforloggingonyoursystem.
Syntax
show logging application [mnemonic | all]
Parameters
Defaults
Ifnoparameterisspecified,informationforallapplicationswillbedisplayed.
Mode
Switchcommand,read‐only.
Example
ThisexampleshowshowtodisplaysystemlogginginformationpertainingtotheSNMP
application.Table 11‐2describestheoutputofthiscommand.
C3(ro)->show logging application SNMP
Application Current Severity Level
---------------------------------------------
90 SNMP 6
1(emergencies) 2(alerts) 3(critical)
4(errors) 5(warnings) 6(notifications)
7(information) 8(debugging)
mnemonic (Optional)Displaysseveritylevelforoneapplicationconfiguredfor
logging.Mnemonicswillvarydependingonthenumberandtypesof
applicationsrunningonyoursystem.Samplemnemonicsandtheir
correspondingapplicationsarelistedinTable 11‐3onpage 11‐8.
Note: Mnemonic values are case sensitive and must be typed as they appear in
Table 11-3.
all (Optional)Displaysseveritylevelforallapplicationsconfiguredfor
logging.
Table 11-2 show logging application Output Details
Output... What it displays...
Application A mnemonic abbreviation of the textual description for
applications being logged.
Current Severity Level Severity level at which the server is logging messages for the
listed application. This range (from 1 to 8) and its associated
severity list is shown in the CLI output. For a description of these
entries, which are set using the set logging application
command, refer to “set logging application” on page 11-8.