Specifications

ip igmp last-member-query-interval
SecureStack C3 Configuration Guide 10-17
Mode
Interfaceconfiguration:C3(su)‐>router(Config‐if(Vlan1))#
Example
ThisexampleshowshowtosettheIGMPstartupquerycountto10onVLAN1:
C3(su)->router(Config)#interface vlan 1
C3(su)->router(Config-if(Vlan 1))#ip igmp startup-query-count 10
ip igmp last-member-query-interval
Usethiscommandtosetthemaximumresponsetimebeinginsertedintogroup‐specificqueries
sentinresponsetoleavegroupmessages.ThenoformofthiscommandresetstheIGMPlast
memberqueryintervaltothedefaultvalueof1second.
Syntax
ip igmp last-member-query-interval time
no ip igmp last-member-query-interval
Parameters
Defaults
None.
Mode
Interfaceconfiguration:C3(su)‐>router(Config‐if(Vlan1))#
Example
ThisexampleshowshowtosettheIGMPlastmemberqueryintervalto10secondsonVLAN 1:
C3(su)->router(Config)#interface vlan 1
C3(su)->router(Config-if(Vlan 1))#ip igmp last-member-query-interval 10
time SpecifiestheIGMPlastmemberqueryinterval.Validvaluesarefrom0to
255seconds.Thedefaultvalueis1second.