Specifications

set igmpsnooping add-static
SecureStack C3 Configuration Guide 10-7
set igmpsnooping add-static
ThiscommandcreatesanewstaticIGMPentryoraddsoneormorenewportstoanexistingentry.
Syntax
set igmpsnooping add-static group vlan-list [modify] [port-string]
Parameters
Defaults
Ifnoportsarespecified,allportsareaddedtotheentry.
Ifmodifyisnotspecified,anewentryiscreated.
Mode
Switchcommand,read‐write.
Usage
UsethiscommandtocreateandconfigureLayer2IGMPentries.
Example
ThisexamplecreatesanIGMPentryforthemulticastgroupwithIPaddressof233.11.22.33
configuredonVLAN20configuredwiththeportge.1.1.
C3(su)->set igmpsnooping add-static 233.11.22.33 20 ge.1.1
set igmpsnooping remove-static
ThiscommanddeletesastaticIGMPentryorremovesoneormorenewportsfromanexisting
entry.
Syntax
set igmpsnooping remove-static group vlan-list [modify] [port-string]
Parameters
Defaults
Ifnoportsarespecified,allportsareremovedfromtheentry.
group SpecifiesthemulticastgroupIPaddressfortheentry.
vlan‐list SpecifiestheVLANsonwhichtoconfiguretheentry.
modify (Optional)Addsthespecifiedportorportstoanexistingentry.
port‐string (Optional)Specifiestheportorportstoadd
totheentry.
group SpecifiesthemulticastgroupIPaddressoftheentry.
vlan‐list SpecifiestheVLANsonwhichtheentryisconfigured.
modify (Optional)Removesthespecifiedportorportsfromanexistingentry.
port‐string (Optional)Specifiestheportorportstoremovefromtheentry.