Specifications

set igmpsnooping mcrtrexpiretime
10-6 IGMP Configuration
Mode
Switchcommand,read‐write.
Usage
Thisvaluemustbeles sthantheIGMPmaximumresponsetimedescribedin“setigmpsnooping
groupmembershipinterval”onpage 10‐5.
Example
ThisexampleshowshowtosettheIGMPmaximumresponsetimeto100seconds:
C3(su)->set igmpsnooping maxresponse 100
set igmpsnooping mcrtrexpiretime
UsethiscommandtoconfiguretheIGMPmulticastrouterexpirationtimeforthesystem.
Syntax
set igmpsnooping mcrtrexpire time
Parameters
Defaults
None.
Mode
Switchcommand,read‐write.
Usage
Thistimerisforexpiringtheswitchfromthemulticastdatabase.Ifthetimerexpires,andtheonly
addressleftisthemulticastswitch,thentheentrywillberemoved.
Example
ThisexampleshowshowtosettheIGMPmulticastrouterexpirationtimetoinfinity:
C3(su)->set igmpsnooping mcrtrexpiretime 0
time SpecifiestheIGMPmulticastrouterexpirationtime.Validvaluesare0‐
3600seconds.Avalueof0willconfigurethesystemwithaninfinite
expirationtime.Thedefaultvalueis0.