Specifications

set igmpsnooping groupmembershipinterval
SecureStack C3 Configuration Guide 10-5
set igmpsnooping groupmembershipinterval
UsethiscommandtoconfiguretheIGMPgroupmembershipinterval timeforthesystem.
Syntax
set igmpsnooping groupmembershipinterval time
Parameters
Defaults
None.
Mode
Switchcommand,read‐write.
Usage
TheIGMPgroupmembershipintervaltimesetsthefrequencyofhost‐queryframetransmissions
andmustbegreaterthantheIGMPmaximumresponsetimeasdescribedin“setigmpsnooping
maxresponse”onpage 10‐5.
Example
ThisexampleshowshowtosettheIGMPgroupmembershipintervalto250seconds:
C3(su)->set igmpsnooping groupmembershipinterval 250
set igmpsnooping maxresponse
UsethiscommandtoconfiguretheIGMPquerymaximumresponsetimeforthesystem.
Syntax
set igmpsnooping maxresponse time
Parameters
Defaults
None.
time SpecifiestheIGMPgroupmembershipinterval.Validvaluesare2‐3600
seconds.
Thisvalueworkstogetherwiththesetigmpsnoopingmaxresponsetime
commandtoremoveportsfromanIGMPgroupandmustbegreaterthan
themaxresponsetimevalue.
time SpecifiestheIGMPmaximumqueryresponsetime.Validvaluesare100‐
255seconds.Thedefaultvalueis100seconds.
Thisvalueworkstogetherwiththesetigmpsnooping
groupmembershipintervalcommandtoremoveportsfromanIGMPgroup
andmustbelesserthanthegroupmembershipintervalvalue.