Specifications

clear port txq
9-10 Port Priority Configuration
Queuescanbesetforstrictpriority(SP)orweightedround‐robin(WRR).IfsetforWRRmode,
weightsmaybeassignedtothosequeueswiththiscommand.Weightsarespecifiedintherange
of0to100percent.Weightsspecifiedforqueues0through5onanyportmusttotal
100percent.
Queues0through5canbechangedtostrictprioritybyconfiguringqueues0through4at0
percentandqueue5at100percent.QueuescanbechangedbacktoWRRbychangingtheweight
ofqueues0through5,orbyissuingtheclearporttxq
command.
Examples
Thisexampleshowshowtochangethearbitrationvaluesforthesixtransmitqueuesbelongingto
ge.1.1:
C3(su)->set port txq ge.1.1 17 17 17 17 16 16
Thisexampleshowshowtochangethealgorithmtostrictpriorityforthesixtransmitqueues
belongingtoge.1.1:
C3(su)->set port txq ge.1.1 0 0 0 0 0 100
C3(su)->show port txq ge.1.1
Port Alg Q0 Q1 Q2 Q3 Q4 Q5 Q6 Q7
----- --- --- --- --- --- --- --- --- ---
ge.1.1 STR SP SP SP SP SP SP SP SP
clear port txq
Usethiscommandtoclearporttransmitqueuevaluesbacktotheirdefaultvalues.
Syntax
clear port txq port-string
Parameters
Defaults
Bydefault,transmitqueuesaredefinedasfollows:
Mode
Switchcommand,read‐write.
port‐string Clearstransmitqueuevaluesonspecificport(s)backtotheirdefault
values.Foradetaileddescriptionofpossibleport‐stringvalues,referto
“PortStringSyntaxUsedintheCLI”onpage 4‐1.
Onlyphysicalportscanbeconfiguredwiththiscommand.LAGports
cannot
beconfigured.
Queue Mode Weight Queue Mode Weight
0WRR14WRR5
1WRR25WRR6
2 WRR 3 6 Strict (not configurable) –
3 WRR 4 7 Strict (not configurable) –