Specifications

clear cos settings
8-20 Policy Classification Configuration
•CoSIndex
IndexesareuniqueidentifiersforeachCoSsetting.CoSindexes0through7arecreatedby
defaultandmappeddirectlyto802.1ppriorityforbackwardscompatibility.Theseentries
cannotberemoved,and802.1ppriorityvaluescannotbechanged.WhenCoSisenabled,
indexesareassigned.Upto256CoS
indexesorentriescanbeconfigured.
•Priority
802.1pprioritycanbeappliedperCoSindex.ForeachnewCoSindexcreated,theuserhas
theoptiontoassignan802.1ppriorityvalue0to7fortheclassofservice.CoSindexes0
through7mapdirectlyto802.1pprioritiesandcannot
bechangedastheyexistforbackward
compatibility.
•ToS
Thisvaluecanbe setperclassofservice,butisnotrequired.Whenaframeisassignedtoa
classofserviceforwhichthisvalueisconfigured,theToSfieldoftheincomingIPpacketwill
beoverwrittentothe
user‐definedvalue.ToSbits0‐255canbeset,makingtheentireToSfield
rewritable.ToScanbesetforCoSindexes0through7.
Example
ThisexampleshowshowtocreateCoSentry8withapriorityvalueof3:
C3(rw)->set cos settings 8 priority 3
clear cos settings
UsethiscommandtoclearClassofServiceentrysettings.
Syntax
clear cos settings cos-list {[all] | [priority] [tos-value]}
Parameters
Defaults
None.
Mode
Switchcommand,read‐write.
Example
ThisexampleshowshowtoclearthepriorityforCoSentry8:
C3(rw)->clear cos settings 8 priority
cos‐list SpecifiesaClassofServiceentrytoclear.
all Clearsallsettingsassociatedwiththisentry.
priority Clearsthepriorityvalueassociatedwiththisentry.
tos‐value ClearstheTypeofServicevalueassociatedwiththisentry.