Specifications

set cos state
8-18 Policy Classification Configuration
set cos state
UsethiscommandtoenableordisableClassofService.
Syntax
set cos state {enable | disable}
Parameters
Defaults
None.
Mode
Switchcommand,read‐write.
Usage
TheCoSstateisaglobalsettingwhichissettodisabledbydefault.WhenCoSisenabled,controls
configuredforCoSwillsupersedeport‐levelcontrolforpriorityqueuemapping,portrate
limiting,andtransmitqueue mapping.Althoughport‐levelsettingscanbeconfigured,theywill
havenoeffectwhile
CoSisenabled.DisablingCoSwillrestoreanyexistingport‐levelsettings.
Example
ThisexampleshowshowtoenableClassofService:
C3(rw)->set cos state enable
show cos state
UsethiscommandtodisplaytheClassofServiceenablestate.
Syntax
show cos state
Parameters
None.
Defaults
None.
Mode
Switchcommand,read‐only.
Example
ThisexampleshowshowtoshowtheClassofServiceenablestate:
C3(rw)->show cos state
Class-of-Service application is enabled
enable|disable EnablesordisablesClassofServiceontheswitch.Defaultstateis
disabled.