Specifications

Assigning Ports to Policy Profiles
SecureStack C3 Configuration Guide 8-15
Assigning Ports to Policy Profiles
Purpose
Toassignandunassignportstopolicyprofiles.
Commands
Thecommandsusedtoassignportstopolicyprofilesarelistedbelow.
set policy port
Usethiscommandtoassignportstoapolicyprofile.
Syntax
set policy port port-string profile-index
Parameters
Defaults
None.
Mode
Switchcommand,read‐write.
Example
ThisexampleshowshowtoallowGigabitEthernetports5through15inslot1totransmitframes
accordingtopolicyprofile1:
C3(su)->set policy port ge.1.5-15 1
For information about... Refer to page...
set policy port 8-15
clear policy port 8-16
port‐string Specifiestheport(s)toaddtothepolicyprofile.Foradetaileddescription
ofpossibleport‐stringvalues,referto“PortStringSyntaxUsedintheCLI”
onpage 4‐1.
profile‐index SpecifiestheIDofthepolicyprofile(role)towhichtheport(s)willbe
added.Thisvalue
mustmatchtheprofile‐indexvalueassignedusingthe
setpolicyprofilecommand(“setpolicyprofile”onpage 8‐4)inorderfor
apolicyprofiletobeactiveonthespecifiedport.