Specifications

Configuring Policy Profiles
8-2 Policy Classification Configuration
Configuring Policy Profiles
Purpose
Toreview,create,changeandremoveuserprofilesthatrelatetobusiness‐drivenpoliciesfor
managingnetworkresources.
Commands
Thecommandsusedtoreviewandconfigurepolicyprofilesarelistedbelow.
show policy profile
Usethiscommandtodisplaypolicyprofileinformation.
Syntax
show policy profile {all | profile-index [consecutive-pids] [-verbose]}
Parameters
Defaults
Ifoptionalparametersarenotspecified,summaryinformationwillbedisplayedforthespecified
indexorallindices.
Mode
Switchcommand,read‐only.
Example
Thisexampleshowshowtodisplaypolicyinformationforprofile11:
C3(su)->show policy profile 11
Profile Index : 11
Profile Name : MacAuth1
Row Status : active
Port VID Status : Enable
Port VID Override : 11
CoS : 0
CoS Status : Disable
Egress Vlans : none
Forbidden Vlans : none
For information about... Refer to page...
show policy profile 8-2
set policy profile 8-4
clear policy profile 8-5
all|profile‐index Displayspolicyinformationforallprofileindexesoraspecificprofileindex.
consecutive‐pids (Optional)Displaysinformationforspecifiedconsecutiveprofileindexes.
‐verbose (Optional)Displaysdetailedinformation.