Specifications

SecureStack C3 Configuration Guide 8-1

Policy Classification Configuration

ThischapterdescribesthePolicyClassificationsetofcommandsandhowtousethem.

Policy Classification Configuration Summary

SecureStackC3devicessupportpolicyprofile‐basedprovisioningofnetworkresourcesby

allowingITadministratorsto:

•Create,changeorremovepolicyprofilesbasedonbusiness‐specificuseofnetworkservices.

•Permitordenyaccesstospecificservicesbycreatingandassigningclassificationruleswhich

mapuserprofilestoprotocol‐basedframefiltering

policiesconfiguredforaparticularVLAN

orClassofService(CoS).

• Assignorunassignportstopolicyprofilessothatonlyportsactivatedforaprofilewillbe

allowedtotransmitframesaccordingly.

For information about... Refer to page...

Policy Classification Configuration Summary 8-1

Configuring Policy Profiles 8-2

Configuring Classification Rules 8-6

Assigning Ports to Policy Profiles 8-15

Configuring Policy Class of Service (CoS) 8-17

Note: It is recommended that you use Enterasys Networks NetSight Policy Manager as an

alternative to CLI for configuring policy classification on the SecureStack C3 devices.