Specifications

Setting the Host VLAN
7-20 802.1Q VLAN Configuration
Setting the Host VLAN
Purpose
ToconfigureahostVLANthatonlyselectdevicesareallowedtoaccess.Thissecuresthehostport
formanagement‐onlytasks.
Commands
ThecommandsneededtoconfigurehostVLANsarelistedbelow.
show host vlan
UsethiscommandtodisplaythecurrenthostVLAN.
Syntax
show host vlan
Parameters
None.
Defaults
None.
Mode
Switchcommand,read‐only.
Example
ThisexampleshowshowtodisplaythehostVLAN:
C3(su)->show host vlan
Host vlan is 7.
Note: The host port is the management entity of the device. Refer to “Creating a Secure
Management VLAN” on page 7-1 for more information.
For information about... Refer to page...
show host vlan 7-20
set host vlan 7-21
clear host vlan 7-22