Specifications

clear port vlan
7-10 802.1Q VLAN Configuration
clear port vlan
Usethiscommandtoresetaport’s802.1QportVLANID(PVID)tothehostVLANID1.
Syntax
clear port vlan port-string
Parameters
Defaults
None.
Mode
Switchcommand,read‐write.
Example
Thisexampleshowshowtoresetportsfe.1.3through11toaVLAN IDof1(HostVLAN):
C3(su)->clear port vlan fe.1.3-11
show port ingress filter
Usethiscommandtoshowallportsthatareenabledforportingressfiltering, whichlimits
incomingVLANIDframesaccordingtoaportVLANegresslist.IftheVLANIDspecifiedinthe 
receivedframeisnotontheport’sVLANegresslist,thenthatframeisdroppedandnot

forwarded.
Syntax
show port ingress-filter [port-string]
Parameters
Defaults
Ifport‐stringisnotspecified,ingressfilteringstatusforallportswillbedisplayed.
Mode
Switchcommand,read‐only.
Example
Thisexampleshows howtodisplaytheportingressfilterstatusforFastEthernetports10through
15inunit1.Inthiscase,theportsaredisabledforingressfiltering:
port‐string Specifiestheport(s)toberesettothehostVLANID1.Foradetailed
descriptionofpossibleport
‐stringvalues,referto“PortStringSyntaxUsed
intheCLI”onpage 4‐1.
port‐string (Optional)Specifiestheport(s)forwhichtodisplayingressfilteringstatus.
Foradetaileddescriptionofpossibleport‐stringvalues,referto“PortString
SyntaxUsedintheCLI”onpage 4‐1.