Specifications

set spantree legacypathcost
SecureStack C3 Configuration Guide 6-31
set spantree legacypathcost
Usethiscommandtoenableordisablelegacy(802.1D)pathcostvalues.
Syntax
set spantree legacypathcost {disable | enable}
Parameters
Defaults
None.
Mode
Switchcommand,read‐write.
Usage
Bydefault,legacypathcostisdisabled.Enablingthedevicetocalculatelegacypathcostsaffects
therangeofvalidvaluesthat canbeenteredinthesetspantreeadminpathcostcommand.
Example
Thisexampleshowshowtosetthedefaultpathcostvaluesto802.1D.
C3(rw)->set spantree adminpathcost enable
clear spantree legacypathcost
UsethiscommandtosettheSpanningTreedefaultvalueforlegacypathcostto802.1tvalues.
Syntax
clear spantree legacypathcost
Defaults
None.
Mode
Switchcommand,read‐write.
Example
Thisexampleclearsthelegacypathcostto802.1tvalues.
C3(rw)->clear spantree legacypathcost
disable Use802.1t2001valuestocalculatepathcost.
enable Use802.1d1998valuestocalculatepathcost.