Specifications

show spantree spanguardtrapenable
SecureStack C3 Configuration Guide 6-29
Example
Thisexampleshowshowtounlockportge.1.16:
C3(rw)->clear spantree spanguardlock ge.1.16
show spantree spanguardtrapenable
UsethiscommandtodisplaysthestateoftheSpanningTreespanguardtrapfunction.
Syntax
show spantree spanguardtrapenable
Parameters
None.
Defaults
None.
Mode
Switchcommand,read‐only.
Example
Thisexampleshowshowtodisplaythestateofthe spanguardtrapfunction:
C3(ro)->show spantree spanguardtrapenable
Spanguard SNMP traps are enabled
set spantree spanguardtrapenable
UsethiscommandtoenableordisablethesendingofanSNMPtrapmessagewhenspanguard
haslockedaport.
Syntax
set spantree spanguardtrapenable {disable | enable}
Parameters
Defaults
None.
Mode
Switchcommand,read‐write.
Example
Thisexampleshowshowtodisablethespanguardtrapfunction:
C3(su)->set spantree spanguardtrapenable disable
disable|enable Disablesorenablessendingspanguardtraps.Bydefault,sendingtraps
isenabled.