Specifications

set spantree spanguardtimeout
SecureStack C3 Configuration Guide 6-27
Example
Thisexampleshowshowtodisplaythespanguardtimeoutsetting:
C3(su)->show spantree spanguardtimeout
Spanguard timeout: 300
set spantree spanguardtimeout
Usethiscommandtosettheamountoftime(inseconds)anedgeportwillremainlockedbythe
spanguardfunction.
Syntax
set spantree spanguardtimeout timeout
Parameters
Defaults
None.
Mode
Switchcommand,read‐write.
Example
Thisexampleshowshowtosetthespanguardtimeoutto600seconds:
C3(su)->set spantree spanguardtimeout 600
clear spantree spanguardtimeout
UsethiscommandtoresettheSpanningTreespanguardtimeouttothedefaultvalueof300
seconds.
Syntax
clear spantree spanguardtimeout
Parameters
None.
Defaults
None.
Mode
Switchcommand,read‐write.
timeout Specifiesatimeoutvalueinseconds.Validvaluesare0to65535.
Avalueof0willkeeptheportlockeduntilmanuallyunlocked.Thedefault
valueis300seconds.