Specifications

clear spantree tctrapsuppress
6-24 Spanning Tree Configuration
clear spantree tctrapsuppress
UsethiscommandtoclearthestatusoftopologychangetrapsuppressiononRapidSpanningTree
edgeportstothedefaultstateofenabled (edgeporttopologychangesdonotgeneratetraps).
Syntax
clear spantree tctrapsuppress
Parameters
None.
Defaults
None.
Mode
Switchcommand,read‐write.
Example
Thisexampleshowshowtocleartopologychangetrapsuppressionsetting:
C3(rw)->clear spantree tctrapsuppress
set spantree protomigration
UsethiscommandtoresettheprotocolstatemigrationmachineforoneormoreSpanningTree
ports.WhenoperatinginRSTPmode,thisforcesaporttotransmitMSTPBPDUs.
Syntax
set spantree protomigration <port-string>
Parameters
Defaults
None.
Mode
Switchcommand,read‐write.
Example
Thisexampleshowshowtoresettheprotocolstatemigrationmachineonport20:
C3(su)->set spantree protomigration ge.1.20
port‐string Resettheprotocolstatemigrationmachineforspecificport(s).Fora
detaileddescriptionofpossibleport‐stringvalues,referto“PortString
SyntaxUsedintheCLI”onpage 4‐1.