Specifications

clear spantree mstmap
6-14 Spanning Tree Configuration
Mode
Switchcommand,read‐write.
Example
ThisexampleshowshowtomapFID3toSID2:
C3(su)->set spantree mstmap 3 sid 2
clear spantree mstmap
UsethiscommandtomapaFIDbacktoSID0.
Syntax
clear spantree mstmap fid
Parameters
Defaults
Iffidisnotspecified,allSIDtoFIDmappingswillbereset.
Mode
Switchcommand,read‐write.
Example
ThisexampleshowshowtomapFID2backtoSID0:
C3(su)->clear spantree mstmap 2
show spantree vlanlist
UsethiscommandtodisplaytheSpanningTreeID(s)assignedtooneormoreVLANs.
Syntax
show spantree vlanlist [vlan-list]
Parameters
Defaults
Ifnotspecified,SIDassignmentwillbedisplayedforallVLANs.
Mode
Switchcommand,read‐only.
fid SpecifiesoneormoreFIDstoresetto0.
vlan‐list (Optional)DisplaysSIDsassignedtospecificVLAN(s).