Specifications

Configuring SNMP Notification Parameters
SecureStack C3 Configuration Guide 5-33
Configuring SNMP Notification Parameters
About SNMP Notify Filters
ProfilesindicatingwhichtargetsshouldnotreceiveSNMPnotificationmessagesarekeptinthe
NotifyFiltertable.Ifthistableisempty,meaningthatnofilteringisassociatedwithany SNMP
target,thennofilteringwilltakeplace.“Traps”or“informs”notificationswillbesenttoall
destinationsintheSNMPtargetAddrTa ble
thathavetagsmatchingthosefoundinthe
NotifyTable.
WhentheNotifyFiltertablecontainsprofileentries,theSNMPagentwillfindanyfilterprofile
namethatcorrespondstothetargetparameternamecontainedinanoutgoingnotification
message.Itwillthenapplytheappropriatesubtree‐specificfilterwhengeneratingnotification
messages.
Purpose
ToconfigureSNMPnotificationparametersandoptionalfilters.Notificationsareentitieswhich
handlethegenerationofSNMPv1andv2“traps”orSNMPv3“informs”messagestoselect
managementtargets.Optionalnotificationfiltersidentifywhichtargetsshouldnotreceive
notifications.ForasampleSNMPtrapconfigurationshowinghowSNMPnotificationparameters

areassociatedwithsecurityandauthorizationcriteria(targetparameters)andmappedtoa
managementtargetaddress,referto“CreatingaBasicSNMPTrapConfiguration” onpage 5‐43.
Commands
ThecommandsusedtoconfigureSNMPnotificationparametersandfiltersarelistedbelow.
For information about... Refer to page...
show newaddrtrap 5-34
set newaddrtrap 5-35
show snmp notify 5-36
set snmp notify 5-37
clear snmp notify 5-38
show snmp notifyfilter 5-38
set snmp notifyfilter 5-39
clear snmp notifyfilter 5-40
show snmp notifyprofile 5-40
set snmp notifyprofile 5-41
clear snmp notifyprofile 5-42