Specifications

Configuring SNMP MIB Views
5-20 SNMP Configuration
Configuring SNMP MIB Views
Purpose
ToreviewandconfigureSNMPMIBviews.SNMPviewsmapSNMPobjectstoaccessrights.
Commands
ThecommandsusedtoreviewandconfigureSNMPMIBviewsarelistedbelow.
show snmp view
UsethiscommandtodisplaytheMIBconfigurationforSNMPv3view‐basedaccess(VACM).
Syntax
show snmp view [viewname] [subtree oid-or-mibobject] [volatile | nonvolatile |
read-only]
Parameters
Defaults
Ifnoparametersarespecified,allSNMPMIBviewconfiguration informationwillbedisplayed.
Mode
Switchcommand,read‐only.
Example
ThisexampleshowshowtodisplaySNMPMIBview configurationinformation:
C3(su)->show snmp view
--- SNMP MIB View information ---
View Name = All
Subtree OID = 1
Subtree mask =
View Type = included
For information about... Refer to page...
show snmp view 5-20
show snmp context 5-22
set snmp view 5-23
clear snmp view 5-24
viewname (Optional)DisplaysinformationforaspecificMIBview.
subtreeoid‐or‐mibobject (Optional)DisplaysinformationforaspecificMIBsubtreewhen
viewnameisspecified.
volatile|nonvolatile|
read‐only
(Optional)Displaysentriesforaspecificstoragetype.