Specifications

clear snmp access
SecureStack C3 Configuration Guide 5-19
clear snmp access
UsethiscommandtocleartheSNMPaccessentryofaspecificgroup,includingitssetSNMP
security‐model,andlevelofsecurity.
Syntax
clear snmp access groupname security-model {v1 | v2c | usm} [noauthentication |
authentication | privacy] [context context]
Parameters
Defaults
Ifsecuritylevelisnotspecified,alllevelswillbecleared.
Ifcontextisnotspecified,nonewillbeapplied.
Mode
Switchcommand,read‐write.
Example
ThisexampleshowshowtoclearSN MPversion3accessforthe“mis‐group”viathe
authenticationprotocol:
C3(su)->clear snmp access mis-group security-model usm authentication
groupname SpecifiesthenameoftheSNMPgroupforwhichtoclearaccess.
security‐modelv1|
v2c|usm
SpecifiesthesecuritymodeltobeclearedfortheSNMPaccessgroup.
noauthentication|
authentication|
privacy
(Optional)ClearsaspecificsecuritylevelfortheSNMPaccessgroup.
contextcontext (Optional)Clearsaspecific
contextfortheSNMPaccessgroup.Enter/‐/
toclearthedefaultcontext.