Specifications

show snmp user
SecureStack C3 Configuration Guide 5-9
show snmp user
UsethiscommandtodisplayinformationaboutSNMPusers.Thesearepeopleregisteredto
accessSNMPmanagement.
Syntax
show snmp user [list] | [user] | [remote remote] [volatile | nonvolatile | read-
only]
Parameters
Defaults
Iflistisnotspecified,detailedSNMPinformationwillbedisplayed.
Ifuserisnotspecif ied,informationaboutallSNMPuserswillbedisplayed.
Ifremoteisnotspecified,userinformationaboutthelocalSNMPenginewillbedisplayed.
Ifnotspecified,userinformationforallstoragetypeswillbedisplayed.
Mode
Switchcommand,read‐only.
Examples
ThisexampleshowshowtodisplayanSNMPuserlist:
(su)->show snmp user list
--- SNMP user information ---
--- List of registered users:
Guest
admin1
admin2
netops
ThisexampleshowshowtodisplayinformationfortheSNMP“guest”user:
(su)->show snmp user guest
--- SNMP user information ---
EngineId: 00:00:00:63:00:00:00:a1:00:00:00:00
Username = Guest
Auth protocol = usmNoAuthProtocol
Privacy protocol = usmNoPrivProtocol
Storage type = nonVolatile
Row status = active
Table 5‐4showsadetailedexplanationofthecommandoutput.
list (Optional)DisplaysalistofregisteredSNMPusernames.
user (Optional)Displaysinformationaboutaspecificuser.
remoteremote (Optional)DisplaysinformationaboutusersonaspecificremoteSNMP
engine.
volatile|nonvolatile
|read‐only
(Optional)Displaysuserinformationforaspecified
storagetype.