Specifications

set port lacp
SecureStack C3 Configuration Guide 4-51
Defaults
Atleastoneparametermustbeenteredperport‐string.
Ifenableordisablearenotspecified,port(s)willbeenabledwiththeLACPparametersentered.
Mode
Switchcommand,read‐write.
Usage
LACPcommandsandparametersbeginningwithan“a”(suchasaadminkey)setacto rvalues.
Correspondingcommandsandparametersbeginningwitha“p”(suchaspadminkey)set
correspondingpartnervalues.ActorreferstothelocaldeviceparticipatinginLA CPnegotiation,
whilepartnerreferstoitsremotedevicepartnerattheother
endofthenegotiation.Actorsand
partnersmaintaincurrentstatusoftheotherviaLACPDUscontaininginformationabouttheir
ports’LACPstatusandoperationalstate.
Example
Thisexampleshowshowtosettheactoradminkeyto3555forportge.3.16:
C3(su)->set port lacp ge.3.16 aadminkey 3555
padminport
padminport
Setsaadefaultvaluetouseastheport’spartneradminvalue.Validvalues
are1‐65535.
padminportpri
padminportpri
Setsaadefaultvaluetouseastheport’spartnerportpriority.Validvalues
are0‐65535,withlowervaluesgivenhigherpriority.
padminstate
lacpactive|
lacptimeout|
lacpagg|lacpsync
|lacpcollect|
lacpdist|lacpdef|
lacpexpire
Setsaport’spartnerLACPadministrativestate.Seeaadminstateforvalid
options.
padminsysid
padminsysid
Setsadefaultvaluetouseastheport’spartnersystemID.ThisisaMAC
address.
padminsyspri
padminsyspri
Setsadefaultvaluetouseastheport’s
partnerpriority.Validvaluesare0
‐65535,withlowervaluesgivenhigherpriority.