Specifications

clear lacp singleportlag
4-48 Port Configuration
clear lacp singleportlag
UsethiscommandtoresetthesingleportLAGfunctionbacktothedefaultstateofdisabled.
Syntax
clear lacp singleportlag
Parameters
None.
Defaults
None.
Mode
Switchcommand,read‐write.
Example
ThisexampleshowshowtoresetthesingleportLAGfunctionbacktodisabled:
C3(su)->clear lacp singleportlag
show port lacp
Usethiscommandtodisplaylinkaggregationinformationforoneormoreunderlyingphysical
ports.
Syntax
show port lacp port port-string {[status {detail | summary}] | [counters]}
Parameters
Defaults
None.
Mode
Switchcommand,read‐only.
Usage
Statedefinitions,suchasActorAdminStateandPartnerAdminState,areindicatedwithletter
abbreviations.Iftheshowportlacpcommanddisplaysoneormoreofthefollowingletters,it
meansthestateistruefortheassociatedactororpartnerports:
portport‐string DisplaysLACPinformationforspecificport(s).Foradetailed
description
ofpossibleport‐stringvalues,referto“PortStringSyntaxUsedintheCLI”
onpage4‐1.
statusdetail|
summary
DisplaysLACPstatusindetailedorsummaryinformation.
counters DisplaysLACPcounterinformation.