Specifications

set lacp static
4-46 Port Configuration
set lacp static
Usethiscommandtodisableorenablestaticlinkaggregation,ortoassignoneormoreunderlying
physicalportstoaLinkAggregationGroup(LAG).
Syntax
set lacp static {disable | enable} | lagportstring [key] port-string
Parameters
Defaults
Ifnotspecified,akeywillbeassignedaccordingtothespecifiedaggregator.Forexampleakeyof4
wouldbeassignedtolag.0.4.
Mode
Switchcommand,read‐write.
Example
Thisexampleshowshowtoaddportfe.1.6totheLAGofaggregatorport6:
C3(su)->set lacp static lag.0.6 fe.1.6
clear lacp static
UsethiscommandtoremovespecificportsfromaLinkAggregationGroup.
Syntax
clear lacp static lagportstring port-string
Parameters
disable|enable Disablesorenablesstaticlinkaggregation.
lagportstring SpecifiestheLAGaggregatorporttowhichnewportswillbeassigned.
key (Optional)Specif iesthenewmemberportandLAGportaggregator
adminkeyvalue.Onlyportswithmatchingkeysareallowedto
aggregate.Validvaluesare0‐65535.
Note: This key value must be unique. If ports other than the desired
underlying physical ports share the same admin key value, aggregation
will fail or undesired aggregations will form.
port‐string Specifiesthememberport(s)toaddtotheLAG.Foradetaileddescription
ofpossibleport‐stringvalues,referto“PortStringSyntaxUsedintheCLI”
onpage4‐1.
lagportstring SpecifiestheLAGaggregatorportfromwhichportswillberemoved.
port‐string Specifiestheport(s)toremovefromtheLAG.Foradetaileddescriptionof
possibleport‐stringvalues,referto“PortStringSyntaxUsedintheCLI”
onpage4‐1.