Specifications

set lacp
SecureStack C3 Configuration Guide 4-43
set lacp
UsethiscommandtodisableorenabletheLinkAggregationControlProtocol(LACP)onthe 
device.
Syntax
set lacp {disable | enable}
Parameters
Defaults
None.
Mode
Switchcommand,read‐write.
Example
ThisexampleshowshowtodisableLACP:
C3(su)->set lacp disable
System Priority System priority value which determines aggregation precedence. Only one LACP
system priority can be set on a SecureStack C3 device, using either the set lacp
asyspri command (page 4-44), or the set port lacp command (page 4-50)
.
Admin Key Port’s assigned key. SecureStack C3 devices provide a default admin key value of
32768 for all LAG ports (lag.0.1 though lag.0.6).
Oper Key Port’s operational key, derived from the admin key. Only underlying physical ports
with oper keys matching the aggregator’s will be allowed to aggregate.
Attached Ports Underlying physical ports associated with this aggregator.
Table 4-6 show lacp Output Details (Continued)
Output What It Displays...
disable|enable DisablesorenablesLACP.