Specifications

clear port mirroring
SecureStack C3 Configuration Guide 4-37
clear port mirroring
Usethiscommandtoclearaportmirroringrelationship.
Syntax
clear port mirroring source destination
Parameters
Defaults
None.
Mode
Switchcommand,read‐write.
Example
Thisexampleshowshowtoclearportmirroringbetweensourceportfe.1.4andtargetportfe.1.11:
C3(su)->clear port mirroring fe.1.4 fe.1.11
set mirror vlan
AssignsaVLANtobereservedformirroringtraffic.IfamirroredVLANiscreated,allmirrored
trafficwillegressVLANtagged.AlltrafficonthemirrorVLANwillbeflooded.
Syntax
set mirror vlan vlan-id
Parameters
Defaults
None.
Mode
Switchcommand,read‐write.
Usage
Referto“RemotePortMirroring”onpage4‐33forinformationaboutconfiguringmirrorVLANs.
UsetheshowportmirroringcommandtodisplaytheVLANsconfiguredforremoteport
mirroring.
source Specifiesthesourceportofthemirroringconfigurationtobecleared.For
adetaileddescriptionofpossibleport‐stringvalues,
referto“PortString
SyntaxUsedintheCLI”onpage4‐1.
destination Specifiesthetargetportofthemirroringconfigurationtobecleared.
vlan‐id SpecifiestheVLANtobeusedforremoteportmirroring.TheIDcan
rangefrom2to4093.