Specifications

set port mirroring
4-36 Port Configuration
set port mirroring
Usethiscommandtocreateanewmirroringrelationshiportoenableordisableanexisting
mirroringrelationshipbetweentwoports.
Syntax
set port mirroring {create | disable | enable} source destination}
Parameters
Defaults
None.
Mode
Switchcommand,read‐write.
Usage
NotethatLAGportsandtheirunderlyingphysicalports,asdescribedin“LinkAggregation
ControlProtocol(LACP)”onpage4‐38,cannotbemirrored.
Example
Thisexampleshowshowtocreateandenableportmirroringwithfe.1.4asthesourceport,and
fe.1.11asthetargetport:
C3(su)->set port mirroring create fe.1.4 fe.1.11
C3(su)->set port mirroring enable fe.1.4 fe.1.11
create|disable|
enable
Creates,disablesorenablesmirroringsettingsonthespecifiedports.
source Specifiesthesourceportdesignation.Thisistheportonwhichthetraffic
willbemonitored.Foradetaileddescriptionofpossibleport‐stringvalues,
referto“PortStringSyntaxUsedintheCLI”on
page4‐1.
destination Specifiesthetargetportdesignation.Thisistheportthatwillduplicateor
“mirror”allthetrafficonthemonitoredport.Onlyonedestinationport
canbeconfiguredperstack.
Foradetaileddescriptionofpossibleport‐stringvalues,referto“Port
StringSyntaxUsedinthe
CLI”onpage4‐1.