Specifications

show port mirroring
SecureStack C3 Configuration Guide 4-35
show port mirroring
Usethiscommandtodisplaythesourceandtargetportsformirroring,andwhethermirroringis
currentlyenabledordisabledforthoseports.
Syntax
show port mirroring
Parameters
None.
Defaults
None.
Mode
Switchcommand,read‐only.
Example
Thisexampleshowshowtodisplayportmirroringinformation.Inthi scase,fe.1.4isconfiguredas
asourceportandfe.1.11isatargetandmirroringhasbeenenabledbetweentheseports:
C3(su)->show port mirroring
Port Mirroring
==============
Source Port = fe.1.4
Target Port = fe.1.11
Frames Mirrored = Rx and Tx
Port Mirroring status enabled.