Specifications
Disabling / Enabling and Naming Ports
4-6 Port Configuration
Thisexampleshowshowtodisplayallfe.3.1portcounterstatisticsrelatedtotrafficthroughthe
device.
C3(su)->show port counters fe.3.1 switch
Port: fe.3.1 Bridge Port: 2
802.1Q Switch Counters
-----------------------
Frames Received 0
Frames Transmitted 0
Table 4‐2providesanexplanationofthecommandoutput.
Disabling / Enabling and Naming Ports
Purpose
Todisableandre‐enableoneormoreports,andtoassignanaliastoaport.Bydefault,allportsare
enabledatdevicestartup.Youmaywanttodisableportsforsecurityortotroubleshootnetwork
issues.Portsmayalsobeassignedanaliasforconvenience.
Commands
Thecommandsusedtoenable,disable,andnameportsarelistedbelow.
Table 4-2 show port counters Output Details
Output What It Displays...
Port Port designation. For a detailed description of possible port-string values, refer to
“Port String Syntax Used in the CLI” on page 4-1.
MIB2 Interface MIB2 interface designation.
Bridge Port IEEE 802.1D bridge port designation.
MIB2 Interface
Counters
MIB2 network traffic counts
802.1Q Switch
Counters
Counts of frames received, transmitted, and filtered.
For information about... Refer to page...
set port disable 4-7
set port enable 4-8
show port alias 4-8
set port alias 4-9