Specifications

clear config
3-70 Basic Configuration
Reloading switch 1.
This switch is manager of the stack.
STACK: detach 3 units
clear config
Usethiscommandtocleartheuser‐definedconfigurationparam eters.
Syntax
clear config [all]
Parameters
Defaults
Ifallisnotspecified,stackingconfigurationparameterswillnotbecleared.
Mode
Switchcommand,read‐write.
Usage
Whenusingtheclearconfigcommandtoclearconfigurationparametersinastack,itisimportant
torememberthefollowing:
•UseclearconfigtoclearconfigurationparameterswithoutclearingstackunitIDs.This
commandWILLNOTclearstackparametersandavoidstheprocessofre‐numbering the
stack.
•Useclearconfigall
whenitisnecessarytoclearallconfigurationparameters,includingstack
unitIDsandswitchpriorityvalues.
•UsetheclearipaddresscommandtocleartheIPaddress.
Configurationparametersandstackinginformationcanalsobeclearedonthemasterunitonlyby
selectingoption10(restoreconfigurationtofactorydefaults)
fromthebootmenuonswitch
startup.Thisselectionwillleavestackingprioritiesonallotherunits.
Example
Thisexampleshowshowtoclearconfigurationparametersincluding stackingparameters:
C3(su)->clear config all
all (Optional)Clearsuser‐definedconfigurationparametersandstackunit
numbersandpriorities.