Specifications

set ciscodp status
3-62 Basic Configuration
set ciscodp status
UsethiscommandtoenableordisabletheCiscodiscoveryprotocolgloballyontheswitch.
Syntax
set ciscodp state {auto | disable | enable}
Parameters
Defaults
None.
Mode
Switchcommand,readwrite.
Example
ThisexampleshowshowtogloballyenableCiscoDP:
C3(su)->set ciscodp state enable
Table 3-6 show ciscodp port info Output Details
Output What It Displays...
Port Port designation. For a detailed description of possible port-string values, refer to
Port String Syntax Used in the CLI” on page 4-1.
State Whether Cisco DP is enabled, disabled or auto-enabled on the port. Default state of
enabled can be changed using the set ciscodp port command.
v vid Whether a voice VLAN ID has been set on this port. Default of none can be changed
using the set ciscodp port command.
trusted The trust mode of the port. Default of trusted can be changed using the set ciscodp
port command.
cos The Class of Service priority value for untrusted traffic. The default of 0 can be
changed using the set ciscodp port command.
auto GloballyenableonlyifCiscoDPPDUsarereceived.
disable GloballydisableCiscodiscoveryprotocol.
enable GloballyenableCiscodiscoveryprotocol.