Specifications

show tftp settings
SecureStack C3 Configuration Guide 3-51
Mode
Switchcommand,read‐write.
Usage
Usetheshowconfigcommandasdescribedonpage3‐48todisplaycurrentimageand
configurationfilenames.
Example
Thisexampleshowshowtodeletethe“Jan1 _2004.cfg”configurationfile:
C3(su)->delete configs/Jan1_2004.cfg
show tftp settings
UsethiscommandtodisplayTFTPsettingsusedbytheswitchduringdatatransfersusingTFTP.
Syntax
show tftp settings
Parameters
None.
Defaults
None.
Mode
Switchcommand,read‐only.
Usage
TheTFTP timeoutvaluecanbesetwiththesettftptimeoutcommand.TheTFTPretryvaluecan
besetwiththesettftpretrycommand.
Example
Thisexampleshowstheoutputofthiscommand.
C3(ro)->show tftp settings
TFTP packet timeout (seconds): 2
TFTP max retry: 5
set tftp timeout
Usethiscommandtoconfigurehow longTFTP willwaitforareplyofeitheranacknowledgement
packetoradatapacketduringadatatransfer.
Syntax
set tftp timeout seconds