Installation guide

Using LANVIEW
4-2 Troubleshooting
NOTE: The terms flashing, blinking, and solid used in Table 4-1 indicate the
following:
Flashing: LED is flashing randomly.
Blinking: LED is flashing at a steady rate (approximately 50% on, 50% off).
Solid: LED is on steady and not pulsing.
Table 4-1 LANVIEW LEDs
LED Color State Recommended Action
CPU Red Solid. System is not fully
functional, or the system
is experiencing a fatal
error.
If the LED remains red for several minutes,
the system may have a fatal error. Contact
Enterasys Networks for technical support.
Amber Solid. Power-up testing
in progress.
If the LED remains amber for more than
several minutes, contact Enterasys Networks
for technical support.
Green Solid. System is fully
functional.
None.
Blinking. System is
booting up.
None.
Amber Blinking. Image is being
loaded into Flash
memory.
None.