Specifications

3-60 root Commands
Examples
Thefollowingexampleusestheshowtopologyl3commandtoobtaininterfaceinformationfor
usewiththepingortraceroutecommands
3.21.44 show traffic_capture
Usetheshowtraffic_capturecommandtodisplaythestatusoftrafficcapture.
Syntax
show traffic_capture
Parameters
None
Examples
Thefollowingistheexampleofthestatusdisplaywhenthetrafficcaptureisrunning.
EWC.enterasys.com# show traffic_capture
capture is running
Thefollowingistheexampleofthestatusdisplaywhenthetrafficcaptureisstopped.
esa0 physical 545,esa0 10.109.0.1,10.0.0.2,non
e
esa1 physical -1,esa1 10.0.1.1,10.0.1.2,none
Bridged at AP untagged b@ap -1,N/A
Enterasys-37Topology b@ac 647,esa0 10.209.2.37,0.0.0.0,non
e
777 b@ac 777,esa-1
649 b@ac 649,esa-1
650 b@ac 650,esa0
Topology global info:
Internal VLAN ID: 1
Multicast support:
disabled
EWC.enterasys.com# show topology l3
Name Mode L3:IP
1:Admin admin 192.168.4.37
2:esa0 physical 10.0.0.1
3:esa1 physical 10.0.1.1
4:Enterasys-37Topology b@ac 10.10.1.1
5:CNL-209-AAA:engineering routed 172.22.2.1