Specifications

Enterasys Wireless Controller Software CLI Reference Guide 3-59
3.21.42 show time-config
Usetheshowtime‐configcommandtodisplaythesystemtimeandtimeserversettings.
Syntax
show time-config
Parameters
None
Examples
Thefollowingexampledisplaysthesystemtimeandtimeserversettings
EWC.enterasys.com# show time-config
ntp: internal ntp server
ntpip 1 192.168.4.84
ntpip 2 192.168.4.89
ntpip 3 200.200.200.200
tz America/Montreal
3.21.43 show topology
UsetheshowtopologycommandtodisplaytheIDsandnamesofIPinterfaces.
Syntax
show topology [l3]
Parameters
Usage
YoucanidentifyanIPusingitsinterfacenameor,forshort,theidentifierreturnedbytheshow
topologyl3command.Interfacenameisthenameofanytopol ogywithL3configuration
(Physical,Admin,B@ACorRouted).
Examples
Thefollowingexampledisplaystheoutputoftheshowtopologycommandwhenrunwithout
additionalparameters
l3 DisplaysonlytopologieswithanL3configuration.Thetopologiesare
listedbyindexnumber.
EWC.enterasys.com# show topology
Name Mode L2:VlanId,port L3:IP,GW,DHCP
Admin admin N/A,Admin 192.168.4.37,192.168.4.
11,N/A