Specifications

3-52 root Commands
3.21.36 show snmp
UsetheshowsnmpcommandtodisplaytheSNMPsettingsfortheEnterasysWirelessController.
Syntax
show snmp
Parameters
None
Examples
ThefollowingexampledisplaystheSNMPsett ingsfortheEnterasysWirelessController.
EWC.enterasys.com# show snmp
SNMP v1/v2
contact Bill Smith
location lab-91
rcommunity public
rwcommunity private
context
severity 4 (informational)
port 162
publish-ap enable
trap-manager-v1v2 1 136.157.233.176
trap-manager-v1v2 2 192.168.3.108
no SNMPv3 trap1 destination
no SNMPv3 trap2 destination
3.21.37 show stats
UseshowstatstodisplaythroughputrelatedstatisticsfortheWirelessAPsandfortheEnterasys
WirelessControllerinterfaces.
Syntax
show stats (ap (<ap_serial> [wired | wireless (radio1 | radio2)]) | interface
<interface_name>)
Parameters
Note: Use show ap to list the serial numbers of existing Wireless APs. For more information, see
“3.21.3, show ap” on page 3-24.
ap DisplayspropertiesofanWirelessAP
<ap_serial> SpecifiestheserialnumberofanWirelessAP
wired Displaysthehardwiredconnection
wireless Displaysthewirelessconnection