Specifications

Enterasys Wireless Controller Software CLI Reference Guide 3-45
Examples
ThefollowingexampledisplaysthedetailsofallOSPFinterfaces
EWC.enterasys.com# show ospf interface
OSPF Interface #0:
Port Name :esa0
OSPF Status :Enabled
OSPF authentication :None
Link Cost :10
Hello Interval :10
Dead Interval :40
Retransmit Interval :5
Transmit Delay :1
ThefollowingexampledisplaysthedetailsofallOSPFneighbors
EWC.enterasys.com# show ospf neighbors
Neighbor ID Router ID Priority State IP Address Interface
1 192.168.4.3 1 Full/DR 10.209.0.2 esa0:10.209.0.1
ThefollowingexampledisplaysallOSPFconfigurationdata
EWC.enterasys.com# show ospf config
OSPF Area :0.0.0.5
OSPF Area Type :default
OSPF Router ID :
OSPF Protocol Status :enable
ThefollowingexampledisplaysOSPFinformationfromadatabase
EWC.enterasys.com# show ospf database
Router LSA (Type 1):
Link ID Advertising Router Age Sequence No Checksum Link Count
10.203.1.2 10.203.1.2 1745 0x800001c3 0xae1f 17
10.206.0.1 10.206.0.1 1525 0x8000009d 0x782e 3
Network LSA (Type 2):
Link ID Advertising Router Age Sequence No Checksum
10.109.0.2 192.168.4.3 334 0x800000a8 0x781d
10.203.0.2 192.168.4.3 334 0x80000713 0xb73a
Network Summary LSA (Type 3):
Link ID Advertising Router Age Sequence No Checksum Route
10.2.0.0 192.168.4.3 76 0x80000080 0xd36a 10.2.0.0/24
10.2.0.0 192.168.4.9 969 0x8000007f 0xb187 10.2.0.0/24
config DisplaystheOSPFconfigurationdetails
database Displaysthe OSPFlinkstatedatabase