Specifications

3-38 root Commands
3.21.19 show flash
Usetheshowflashcommandtodisplaywhethertheflashcardismountedornot.
Syntax
show flash <status|sysinfo|list>
Parameters
Examples
Thefollowingexampledisplaysthattheflashcardismounted.
EWC.enterasys.com# show flash status
flash mounted
Thefollowingexampledisplaysthefollowingmemoryusageinformationoftheflashcard:
•Size–Totalcapacityoftheflashcard.
•Used–Spaceusedsofar.
• Available–Spaceavailableforuse.
•Use%–Spaceusedinpercentage.
EWC.enterasys.com# show flash sysinfo
Size Used Available Use %
3.9G 32k 3.9G 1%
Thefollowingexampledisplaysthelistoffilesthataresavedontheflashcard.
EWC.enterasys.com# show flash list
AC-MV-gxs-V5R3.10007.0-1.tar
gxs-V5R3.10007.0-1-rescue.tgz
3.21.20 show healthpoll
UsetheshowhealthpollcommandtodisplaythecurrentHealthPollCheckingsetting.
Syntax
show healthpoll
Parameters
None
Note: The show flash command is applicable only to the Enterasys Wireless Controllers that
support flash devices.
status Displayswhethertheflashcardismountedornot
sysinfo Displaysthememoryusageinformationoftheflashcard
list Displaysallthefilesontheflashcard