Specifications

3-24 root Commands
3.21.2 show active-user
Usethscommandtodisplaythecurrentlyloggedinuser.
Syntax
show active-user
Parameters
None.
Examples
EWC.enterasys.com# show active-user
User: admin
3.21.3 show ap
UsetheshowapcommandtoshowtheconfigurationinformationofWirelessAPsconnectedto
theEnterasysWirelessController.
Syntax
show ap [access | registration | version | load-groups | defaults [config |
standard | 11n | dualband | 4102] | <ap_serial> [clients | static_config | config
| radio1 | radio2 | version]]
Parameters
access DisplaysthestatusoftheWirelessAPs
registration Displaystheregistrationinformation
version DisplaysthesoftwareversioninstalledonWirelessAPs.
load‐groups Displaystheconfiguredloadgroups.
defaults DisplaystheDynamicRadioFrequencymanagementsettings
config DisplaystheconfiguredvaluesoftheWirelessAP
standard DisplaystheconfiguredvaluesofstandardAP(AP2610/AP2620)
11n Displaystheconfiguredvaluesofthe
802.11nWirelessAPs(AP3610/
AP3620)
dualband Displaystheconfiguredvaluesofdualband.
4102 Displaysthe configuredvaluesoftheRBT‐4102accesspoint.
<ap_serial> SpecifiestheserialnumberofaspecificWirelessAP
clients DisplaystheclientsconnectedtotheWirelessAP
static_config Displaysthestaticconfigurationvalues
config DisplaystheconfiguredvaluesfortheWirelessAP
radio1 DisplaystheWireless
AP’sradio1settings
radio2 DisplaystheWirelessAP’sradio2settings
version DisplaysthesoftwareversionandhardwaretypeoftheWirelessAP