Specifications

3-20 root Commands
Please wait while all configured Radius Servers on this VNS are attempted as needed
...
Turned tracing on for Radius Client.
TRACE: Radius Request: CP: Server:192.0.1.202 Port:1812 Authtype:2 Username:sales
Retries:0
Test Completed.
3.16 radtest_mba
Usetheradtest_mbacommandtotestRADIUSserversusedbytheEnterasysWirelessController
forMac‐basedauthorization.
Syntax
radtest_mba <vns_name> <MAC Address> <ap_bss_mac_addr> <ap_eth_mac_addr>
[tracing]
Parameters
Examples
ThefollowingexampleteststheRADIUSserveronCNL‐206‐CPWEP
EWC.enterasys.com# radtest_mba CNL-206-CPWEP 00:0E:35:CA:D1:96
Sending MAC-based authorization request to Radius Server for mac_str
00:0E:35:CA:D1:96 on vns_name CNL-206-CPWEP with bss_mac DE:AD:DE:AD:DE:AD and
eth_mac DE:AD:DE:AD:DE:AD.
Please wait while all configured Radius Servers on this VNS are attempted as needed
...
Test Completed.
3.17 reset
UsetheresetcommandtoresetconfigurationsettingsontheEnterasysWirelessControllerto
theirfactorydefaults.
Syntax
reset [license] [mgmt]
<vns_name> SpecifiestheVNSserver
<MACAddress> SpecifiesaMACaddress
<ap_bss_mac_addr> SpecifiestheWirelessAP’sBasicServiceSetIdentifier(BSSID)
<ap_eth_mac_addr> SpecifiestheWirelessAP’sethernetMACaddress
tracing Specifiesthattracingwillbeused
Note: The database and factory options for the reset command have been superceded by the
options described here beginning with the V6R1 release.